Similar Posts
Setting Up and Sharpening a Saw
This applies to all saws except the coping saw which does not need sharpening as it comes with replacement blades, to see how to insert the blades, click here. Note: Some saws will need setting before sharpening and some will need sharpening before setting. This all depends on the quality of the teeth to begin…
Buying a Card Scraper
Paul recommends a Veritas scraper as the steel takes a good edge, hardness is just right and not too brittle and they flex well. They come in a set of 4 rectangular scrapers (listed as Veritas Super-Hard Milled Scrapers) which contains scrapers of different thicknesses and sizes so will suit a wider range of options…
Buying a Chisel
When buying chisels, you will usually find a set of 4 or a set of 6. The set of 4 includes the 4 most common sizes listed below and the set of 6 includes the two additional sizes: and 2 additional sizes Some chisels come with a plastic handle and some have a wooden handle,…
Buying a Plough Plane
Paul enjoys using a secondhand Record 043 or 044 plough plane, however these are no longer in production as new models but so far they have been readily available via eBay. You can sometimes get a good secondhand deal on eBay for a Stanley 13-030 or similar plough plane and these work very well too,…
Buying a Woodworker’s Knife
When buying a woodworker’s knife you should look for a thin, strong, flat blade. Don’t be put off by the disposable blade options as some of these can be sharpened and last up to 2 years. Paul recommends the Stanley Folding Pocket Knife model 0 10 598 and the Swann-Morton model SMO-R, which is available…
The Saws Guide
A Note on the Term ‘Handsaw’: Technically all saws can be classed under the term ‘handsaws’ as this is a general term for all saws used by hand (not machines), however, the term ‘handsaws’ can also refer to a specific saw which is described as a large panel saw. In this guide we will be…
6 Comments
Leave a Reply Cancel reply
You must be logged in to post a comment.
I am having a hard time finding Spear & Jackson saws in the US. The distributors I’ve contacted have a lot of Spear & Jackson garden supplies, but they don’t seem to carry the saws. Can you help?
Hi Mark,
Thanks for getting in touch.
We are looking to add tools available in the US in the future, however we want to order the tools ourselves to test out quality first.
This is something we are looking forward to adding to the site.
Thanks,
Izzy
Hi Mark,
maybe this is useful for you:
https://www.amazon.co.uk/Spear-Jackson-9550B-Brass-Tenon/dp/B0043YHJQ2/ref=pd_sbs_60_4?_encoding=UTF8&pd_rd_i=B0043YHJQ2&pd_rd_r=64fa98f8-94e0-11e8-9a6f-ad3730aad927&pd_rd_w=LbsFf&pd_rd_wg=iY4Rp&pf_rd_i=desktop-dp-sims&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_p=5179604776422437276&pf_rd_r=5TZV4SGSBRYEKVFDNDF8&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=5TZV4SGSBRYEKVFDNDF8
scroll down the page to the first review:
5.0 out of 5 starsExcellent value for one purchasing from the USA
25 February 2017
Verified Purchase
I am in the USA and purchased this saw from Amazon UK because the price was a fraction of what it would be in the USA. Shipping was inexpensive and prompt…
Hope this helps,
David
For cutting dovetails does Paul recommend a gents saw or a dovetail saw for a beginner?
Hi,
Thank you for your questions, I passed it on to Paul and his answer is below:
Personally, I reach for a gents saw for all my dovetailing because I feel it is the most efficient cut with the inline handle directly behind the spine.
Kind Regards,
Izzy
Good afternoon,
I was wondering what combination of saws Paul recommends for starting out. Was thinking a 2 panel saws(one for rip, one for crosscut), a carcass saw, a dove tail saw, and a gents saw. Is this a good combination?