Similar Posts
Consumables
Furniture Wax Paul likes to avoid waxes with Toluene in as this can be harmful. Furniture wax can be applied as an frictionless polish on top of shellac. 🇬🇧 Paul uses this one from National Trust UK which costs £6.00* with £4.95 delivery. 🇺🇸 If you are ordering from the US, we are currently testing some…
Buying a File
Guide updated on 18th April 2019 to recommend Bahco. Guide updated on 14th October 2019 to remove the recommendation for a four-in-hand farrier’s rasp as this is not hardened. Guide updated on 11th November to recommend a bastard cut too. A 12″ (305mm) file is usually the longest length used in woodworking and metalworking, Paul…
Using Saws
The Western saws we use don’t cut on the pull-stroke, so you are cutting on the push-stroke and only using the pull-stroke to retrieve the saw ready for the next stroke. Back Saws and Backless Saws (Dovetail, Tenon, Gent’s and Panel Saw) Put your non-dominant foot forward and your dominant foot back, this will enable…
Saw Files
Saw files can also be known as triangular files or three-square files. They often have single cut teeth across the full width of each facet of the file and can come in many different variations including: Paul finds that 3 main sizes cover most saws: When choosing a saw file, it depends on the type…
Buying a Combination Gauge
Buying a combination gauge is more cost effective as it essentially combines the marking and mortise gauge into one gauge. Paul recommends the type that have pins rather than discs as the discs tend to be brittle and fracture in places around the circumference. Discs are often difficult to re-sharpen and if broken can be…
Setting Up and Sharpening a Saw
This applies to all saws except the coping saw which does not need sharpening as it comes with replacement blades, to see how to insert the blades, click here. Note: Some saws will need setting before sharpening and some will need sharpening before setting. This all depends on the quality of the teeth to begin…
6 Comments
Leave a Reply Cancel reply
You must be logged in to post a comment.
I am having a hard time finding Spear & Jackson saws in the US. The distributors I’ve contacted have a lot of Spear & Jackson garden supplies, but they don’t seem to carry the saws. Can you help?
Hi Mark,
Thanks for getting in touch.
We are looking to add tools available in the US in the future, however we want to order the tools ourselves to test out quality first.
This is something we are looking forward to adding to the site.
Thanks,
Izzy
Hi Mark,
maybe this is useful for you:
https://www.amazon.co.uk/Spear-Jackson-9550B-Brass-Tenon/dp/B0043YHJQ2/ref=pd_sbs_60_4?_encoding=UTF8&pd_rd_i=B0043YHJQ2&pd_rd_r=64fa98f8-94e0-11e8-9a6f-ad3730aad927&pd_rd_w=LbsFf&pd_rd_wg=iY4Rp&pf_rd_i=desktop-dp-sims&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_p=5179604776422437276&pf_rd_r=5TZV4SGSBRYEKVFDNDF8&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=5TZV4SGSBRYEKVFDNDF8
scroll down the page to the first review:
5.0 out of 5 starsExcellent value for one purchasing from the USA
25 February 2017
Verified Purchase
I am in the USA and purchased this saw from Amazon UK because the price was a fraction of what it would be in the USA. Shipping was inexpensive and prompt…
Hope this helps,
David
For cutting dovetails does Paul recommend a gents saw or a dovetail saw for a beginner?
Hi,
Thank you for your questions, I passed it on to Paul and his answer is below:
Personally, I reach for a gents saw for all my dovetailing because I feel it is the most efficient cut with the inline handle directly behind the spine.
Kind Regards,
Izzy
Good afternoon,
I was wondering what combination of saws Paul recommends for starting out. Was thinking a 2 panel saws(one for rip, one for crosscut), a carcass saw, a dove tail saw, and a gents saw. Is this a good combination?