MAKING YOUR FIRST WORKBENCH
…(or marking gauge plus mortise gauge) Tenon saw Handsaw Chisel set ½”, ¾” and 1” (12mm, 18mm and 25mm) Chisel hammer or mallet Smoothing plane Brace and bits (or screw…
…(or marking gauge plus mortise gauge) Tenon saw Handsaw Chisel set ½”, ¾” and 1” (12mm, 18mm and 25mm) Chisel hammer or mallet Smoothing plane Brace and bits (or screw…
…x ¾” (approx. 20cm x 35cm x 19mm) Tools: Coping Saw (or a 1″ Chisel, Chisel Hammer and Tenon Saw) Spokeshave Round rasp Round file Plane Pencil Workmate® or workbench…
…spoon and spatula are great learning projects as they involve shaping which builds skill. To make them, the tools you need are: Pencil Coping Saw (or 1″ (25mm) Chisel and Mallet/Chisel…
…on the bench, use a chisel hammer to make sure they are flush at one end. Use sash clamps to keep the table legs in place. Use one of the…
…a dovetail template) Square Knife Dovetail Saw Pencil Chisel 1″ (25mm) or smaller, you might find it easier to pare cut with a ½”(13mm) or a ¾” (19mm) Chisel Hammer…
…2 pieces of wood- ½” (13mm) x 3 ½” (89mm) x 5” (127mm) Square Pencil Dovetail Template Dovetail Saw Knife Chisel– ¾ (19mm), ½ (13mm), and ⅜ (10mm) Chisel Hammer…
…Pencil Steel Rule Gauge Woodworker’s knife Chisel hammer Router Plane (Optional) Chisel x 2 One smaller than the width of your recess and the other 1” (25mm) wide Tenon Saw (Optional)…
…of this guide on our sister site, Woodworking Masterclasses, click here. For this project you will need: Pencil Square Knife Chisel Chisel Hammer Rasp/File Gauge Router Plane Tape measure Tenon…
…you have a go at the regular housing dado course before moving on to these variations. To make these joints, you will need: Pencil Square Knife Chisel Chisel Hammer Router…
…(unevenness) inside the hole helps the glue to form a stronger bond. To clean up the mortise hole, grip the chisel handle firmly with both hands and drag the chisel…