Blog
…This guide is on both chisel hammers and warrington hammers. Paul recommends scraping off the varnish from the handle when you get a new wooden-handled hammer and he recommends adding…
…This guide is on both chisel hammers and warrington hammers. Paul recommends scraping off the varnish from the handle when you get a new wooden-handled hammer and he recommends adding…
…Chisel hammers and wooden mallets are the tools we use to strike the end of the handle to allow you to split, chop and pare wood. Chisels are primarily used…
…don’t have to hammer the mitred tenon. When the last part of the frame comes together, use the soft face of the hammer to seat the joints. Put a clamp…
…of a hammer isn’t needed. SPLIT Another use of a chisel is to split cut. To do this, you position the cutting edge of the chisel on the end grain…
With the recess to depth and cleaned up, lay your piece flat on the bench top and offer the corresponding divider piece to test the joint. Use a chisel hammer…
…it to get stuck too soon, especially if the saw kerf is far from being perpendicular to the grain on the seat. Use a chisel hammer to tap the leg…
…a saw handle, put a hammer in the vise and line the stud on top of this, use another hammer to drive this in from the other side. One strike…
…and shelf are well seated Move on to the top rail … … followed by the other side piece Check for alignment before using the chisel hammer Use a clamp…
…too hard- with a chisel hammer. Move the chisel up to get the full width of the shoulder. If you chop too hard now, you will compress the fibres on…
…chisels. Here are some things you should look out for when buying chisels: Metal capped chisels are made for heavier carpentry work where carpenters generally use steel hammers, some with…