Skip to content

Posts Tagged ‘scraper’

Sharpening a Card Scraper

Sharpening Draw file along the 2 long edges by pushing the file away from you, small steel spirals should appear from the edges as a result of the filing. Place each long edge against the diamond sharpening plate keeping it vertically aligned and push and pull it 10 times making your way through all the…

Read More

Using a Card Scraper

When using a card scraper, wrap three fingers around each side and push your thumbs into the opposite side of the scraper to bend the plate. To begin working the wood, lean the scraper forward and press and push through the base of the scraper plate. The more you bend the card and the more…

Read More

Buying a Card Scraper

Paul recommends a Veritas scraper as the steel takes a good edge, hardness is just right and not too brittle and they flex well. They come in a set of 4 rectangular scrapers (listed as Veritas Super-Hard Milled Scrapers) which contains scrapers of different thicknesses and sizes so will suit a wider range of options…

Read More

Setting Up and Sharpening a #80 Scraper

Setting Up Whilst working on a flat surface, turn the adjusters to loosen the retaining bar and load the blade into the holder. The 45 degree angle should be facing the back. Pinch the bar and blade against the body of the holder, making sure the cutting edge stays flush with the sole, and tighten…

Read More

How To Make a Rounded Card Scraper

This is known as a ‘curved’ or ‘round’ scraper and is mainly used for refining a bowl shape  carved into wood. Draw the centre line down a piece of cardstock, draw a rounded, quadrant shape on one half and cut to shape.   Fold down the centre line and follow the rounded edge using a…

Read More

Using a #80 Scraper

When using the #80 scraper, generally known as the cabinet scraper, the first thing you should do is establish a comfortable grip. It is designed so you can hold the handles and press your thumbs into the back of the centre. This applies the most direct force behind the cutting edge. To lower the blade,…

Read More

The #80 Scraper Guide

Commonly mistaken for an oversized spokeshave, the #80 scraper slices the wood in a similar way to, but not the same as, a plane. Despite the tool’s name, the scraper does not scrape as such but cuts ultra fine shavings. This double handled tool is used in a push motion to remove very fine sections…

Read More

The Card Scraper Guide

The card scraper is a plate of sheet steel which is sharpened along the full length of the long edges and relies on careful precision throughout the sharpening process. The card scraper performs much the same tasks as the #80 scraper (cabinet scraper) and both blade types are made from plate steel, however their blades…

Read More

Forgot your password? Click Here

Need an account? Register Now