The Spokeshave Guide

Spokeshaves are highly versatile woodworking tools used for shaping and smoothing wood. They work similarly to bench planes, the main difference between the two is that bench planes are generally for developing straight surfaces and the spokeshave is used for creating and refining curves as it has a short sole surface, which makes it easier to manoeuvre. The spokeshave has two handles, either side of the blade, and can be used in a push or pull motion (whichever suits the grain, and your position, best). You can adjust the blade depth to take off as much or as little material as you need.

Uses

The spokeshave is a shaping and smoothing tool. It can be used in a wide variety of applications such as smoothing internal and external curves and rounding corners. It is often used to smooth the surface after cutting with chisels or saws. The spokeshave will shave uneven wood to remove small bumps and awkward undulations. This makes it very effective for perfecting any and all curved cuts. It can also be angled side to side to round over an edge or create an angle (bevel) to a corner.

Types of Spokeshave

They generally come in two forms, bevel-down, which is usually common to metal-bodied spokeshaves, or bevel-up which is usually wooden versions. Both types are sold as either flat bottomed or round bottomed. A flat bottomed spokeshave can be used to create chamfered (also bevelled) edges, or to smooth out edges as well as most curves. A round bottomed spokeshave is used for very tight internal curved or hollow work and tight internal bends where the sole of a flat bottomed spokeshave can prevent the blade from reaching the wood.

Parts of a Spokeshave

● Body/ Handle

● Blade

● Cap Iron

◎ Adjusters

● Set Screw

● Retention Screw

Relevant Guides

  • Setting Up and Sharpening a Spokeshave

    Setting Up and Sharpening a Spokeshave

    Note: Be careful when sharpening as the tools will become very sharp, always face the blade away from you when sharpening. Setting Up If your spokeshave is secondhand, check the angle of the bevelled edge using a protractor. The bevel should be no more than 30°. To set the cutting iron depth, use the two…

    Read More

  • Using a Spokeshave

    Using a Spokeshave

    You adjust the blade of the spokeshave to a shallow setting to produce thin shavings and adjust it to a heavier set to take thicker ones. The joy of using the spokeshave is its variable positioning, you can turn the spokeshave to get the angle you need which makes it great working with curves. Place…

    Read More

  • Buying a Spokeshave

    Buying a Spokeshave

    PLEASE NOTE: We have noticed a discrepancy between different models of the Draper spokeshave we previously recommended. Therefore, we do not recommend buying the Draper at present. The Stanley below is performing well. You can buy a decent spokeshave for less than £20 brand new, the metal-bodied Stanley #151 style (there are many brands making…

    Read More


Further Reading

To read more on this we recommend the following from Paul’s blog:

On Closing the Spokeshave Series- Last One For Now

Similar Posts

Leave a Reply