MAKING YOUR FIRST WORKBENCH
…(or marking gauge plus mortise gauge) Tenon saw Handsaw Chisel set ½”, ¾” and 1” (12mm, 18mm and 25mm) Chisel hammer or mallet Smoothing plane Brace and bits (or screw…
…(or marking gauge plus mortise gauge) Tenon saw Handsaw Chisel set ½”, ¾” and 1” (12mm, 18mm and 25mm) Chisel hammer or mallet Smoothing plane Brace and bits (or screw…
…Shellac and Hake Brush Sash Clamps Dovetail Template Spirit Level Coin/washer (optional) Pencil Chisel Hammer Plane Spokeshave Brace and Bit Steel Rule Tape Measure Card Scraper Steel Hammer Square Panel Saw Chisel…
…(19mm) x 2” (51mm) Tools: Plane Spokeshave Gauge Knife Steel rule Square Panel saw Tenon saw Brace and 1″ bit Drill and drill bit Chisel 1” (25mm) and ½ “…
This step is optional but it’s good practice and the hole is especially useful for mixing up batters and such. Use a brace and bit to bore a ¾” (19mm)…
…Sharpening a Swing Brace and Bit Setting Up and Sharpening a Combination Gauge Setting Up and Sharpening a Saw Saw Files Setting Up Rasps and Files Setting Up and Sharpening…
…Using a Swing Brace Using a #80 Scraper Using a Rasp and File Using Saws Using a Woodworker’s Knife Using a Combination Square Using a Plane Using a Spokeshave Using…
…a Router Plane Buying a Combination Gauge Buying a Brace Buying a Woodworker’s Knife Buying a Rasp Buying a File Buying Saws Buying a Spokeshave Buying a Plane Buying a…
…Scraper Guide The Router Plane Guide The Swing Brace Guide The Saws Guide The File Guide The Rasp Guide The Woodworker’s Knife Guide The Spokeshave Guide The Plane Guide The…