Similar Posts
Saw Files
Saw files can also be known as triangular files or three-square files. They often have single cut teeth across the full width of each facet of the file and can come in many different variations including: Paul finds that 3 main sizes cover most saws: When choosing a saw file, it depends on the type…
Buying a Card Scraper
Paul recommends a Veritas scraper as the steel takes a good edge, hardness is just right and not too brittle and they flex well. They come in a set of 4 rectangular scrapers (listed as Veritas Super-Hard Milled Scrapers) which contains scrapers of different thicknesses and sizes so will suit a wider range of options…
Buying a Sliding Bevel
You can certainly make do with only one sliding bevel, but in some larger projects you may be laying out several different angles throughout, and it is beneficial to set a separate sliding bevel to each angle and not alter them for the duration of the project. When buying a sliding bevel, make sure the…
Buying a Plane
Paul Sellers recommends the Bailey-pattern #4 as it usually suits the build or stature of most people, if you have a slightly smaller stature, the #3 might suit better. Paul uses the #4 and #4½ the most. The ½ refers to the extra width, so these planes are both the same in length, but the…
Buying a Woodworker’s Knife
When buying a woodworker’s knife you should look for a thin, strong, flat blade. Don’t be put off by the disposable blade options as some of these can be sharpened and last up to 2 years. Paul recommends the Stanley Folding Pocket Knife model 0 10 598 and the Swann-Morton model SMO-R, which is available…
Buying Diamond Stones
When buying diamond stones, Paul suggests getting a coarse stone between 120-400 grit (250 is best), a fine stone between 600-1000 (600 is best) and a super-fine between 1200-1500 (1200 is best). Paul recommends the 3” (76mm) x 8” (203mm) diamond stones from EZELAP, this width is so you can comfortably fit the width of…
6 Comments
Leave a Reply Cancel reply
You must be logged in to post a comment.
I am having a hard time finding Spear & Jackson saws in the US. The distributors I’ve contacted have a lot of Spear & Jackson garden supplies, but they don’t seem to carry the saws. Can you help?
Hi Mark,
Thanks for getting in touch.
We are looking to add tools available in the US in the future, however we want to order the tools ourselves to test out quality first.
This is something we are looking forward to adding to the site.
Thanks,
Izzy
Hi Mark,
maybe this is useful for you:
https://www.amazon.co.uk/Spear-Jackson-9550B-Brass-Tenon/dp/B0043YHJQ2/ref=pd_sbs_60_4?_encoding=UTF8&pd_rd_i=B0043YHJQ2&pd_rd_r=64fa98f8-94e0-11e8-9a6f-ad3730aad927&pd_rd_w=LbsFf&pd_rd_wg=iY4Rp&pf_rd_i=desktop-dp-sims&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_p=5179604776422437276&pf_rd_r=5TZV4SGSBRYEKVFDNDF8&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=5TZV4SGSBRYEKVFDNDF8
scroll down the page to the first review:
5.0 out of 5 starsExcellent value for one purchasing from the USA
25 February 2017
Verified Purchase
I am in the USA and purchased this saw from Amazon UK because the price was a fraction of what it would be in the USA. Shipping was inexpensive and prompt…
Hope this helps,
David
For cutting dovetails does Paul recommend a gents saw or a dovetail saw for a beginner?
Hi,
Thank you for your questions, I passed it on to Paul and his answer is below:
Personally, I reach for a gents saw for all my dovetailing because I feel it is the most efficient cut with the inline handle directly behind the spine.
Kind Regards,
Izzy
Good afternoon,
I was wondering what combination of saws Paul recommends for starting out. Was thinking a 2 panel saws(one for rip, one for crosscut), a carcass saw, a dove tail saw, and a gents saw. Is this a good combination?