Similar Posts
Buying Diamond Stones
When buying diamond stones, Paul suggests getting a coarse stone between 120-400 grit (250 is best), a fine stone between 600-1000 (600 is best) and a super-fine between 1200-1500 (1200 is best). Paul recommends the 3” (76mm) x 8” (203mm) diamond stones from EZELAP, this width is so you can comfortably fit the width of…
Buying a Sawset
Paul recommends buying a secondhand sawset as they are cheaper and rarely wear out, these are readily found on eBay and also in secondhand outlets such as flea markets and car boot sales. When buying a secondhand sawset, check there is a spring in between the sawset handles before purchasing. Avoid Eclipse plastic handled sawsets…
Buying a File
Guide updated on 18th April 2019 to recommend Bahco. Guide updated on 14th October 2019 to remove the recommendation for a four-in-hand farrier’s rasp as this is not hardened. Guide updated on 11th November to recommend a bastard cut too. A 12″ (305mm) file is usually the longest length used in woodworking and metalworking, Paul…
Buying a Plane
Paul Sellers recommends the Bailey-pattern #4 as it usually suits the build or stature of most people, if you have a slightly smaller stature, the #3 might suit better. Paul uses the #4 and #4½ the most. The ½ refers to the extra width, so these planes are both the same in length, but the…
Buying a Chisel
When buying chisels, you will usually find a set of 4 or a set of 6. The set of 4 includes the 4 most common sizes listed below and the set of 6 includes the two additional sizes: and 2 additional sizes Some chisels come with a plastic handle and some have a wooden handle,…
Buying a Plough Plane
Paul enjoys using a secondhand Record 043 or 044 plough plane, however these are no longer in production as new models but so far they have been readily available via eBay. You can sometimes get a good secondhand deal on eBay for a Stanley 13-030 or similar plough plane and these work very well too,…
6 Comments
Leave a Reply Cancel reply
You must be logged in to post a comment.
I am having a hard time finding Spear & Jackson saws in the US. The distributors I’ve contacted have a lot of Spear & Jackson garden supplies, but they don’t seem to carry the saws. Can you help?
Hi Mark,
Thanks for getting in touch.
We are looking to add tools available in the US in the future, however we want to order the tools ourselves to test out quality first.
This is something we are looking forward to adding to the site.
Thanks,
Izzy
Hi Mark,
maybe this is useful for you:
https://www.amazon.co.uk/Spear-Jackson-9550B-Brass-Tenon/dp/B0043YHJQ2/ref=pd_sbs_60_4?_encoding=UTF8&pd_rd_i=B0043YHJQ2&pd_rd_r=64fa98f8-94e0-11e8-9a6f-ad3730aad927&pd_rd_w=LbsFf&pd_rd_wg=iY4Rp&pf_rd_i=desktop-dp-sims&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_p=5179604776422437276&pf_rd_r=5TZV4SGSBRYEKVFDNDF8&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=5TZV4SGSBRYEKVFDNDF8
scroll down the page to the first review:
5.0 out of 5 starsExcellent value for one purchasing from the USA
25 February 2017
Verified Purchase
I am in the USA and purchased this saw from Amazon UK because the price was a fraction of what it would be in the USA. Shipping was inexpensive and prompt…
Hope this helps,
David
For cutting dovetails does Paul recommend a gents saw or a dovetail saw for a beginner?
Hi,
Thank you for your questions, I passed it on to Paul and his answer is below:
Personally, I reach for a gents saw for all my dovetailing because I feel it is the most efficient cut with the inline handle directly behind the spine.
Kind Regards,
Izzy
Good afternoon,
I was wondering what combination of saws Paul recommends for starting out. Was thinking a 2 panel saws(one for rip, one for crosscut), a carcass saw, a dove tail saw, and a gents saw. Is this a good combination?