Similar Posts
Buying a Router Plane
Paul would recommend that you make your own router plane. He says “it’s as easy to make as a dovetail box”. The videos and technical drawings are available on Woodworking Masterclasses The metal hardware is available from Rokesmith, our physical products selling platform for £35 (plus VAT and shipping.) We ship worldwide. If you don’t…
Buying a Hammer
Stanley and Brades are both good makes to look out for. These are quite difficult to find at a 10oz weight so if you struggle to find one, go for a 12oz instead. eBay often have good secondhand ones so it’s worth searching there. If you cannot find these, then a 10oz/12oz claw hammer will…
Buying a Sliding Bevel
You can certainly make do with only one sliding bevel, but in some larger projects you may be laying out several different angles throughout, and it is beneficial to set a separate sliding bevel to each angle and not alter them for the duration of the project. When buying a sliding bevel, make sure the…
Saw Files
Saw files can also be known as triangular files or three-square files. They often have single cut teeth across the full width of each facet of the file and can come in many different variations including: Paul finds that 3 main sizes cover most saws: When choosing a saw file, it depends on the type…
Buying a Spokeshave
PLEASE NOTE: We have noticed a discrepancy between different models of the Draper spokeshave we previously recommended. Therefore, we do not recommend buying the Draper at present. The Stanley below is performing well. You can buy a decent spokeshave for less than £20 brand new, the metal-bodied Stanley #151 style (there are many brands making…
The Saws Guide
A Note on the Term ‘Handsaw’: Technically all saws can be classed under the term ‘handsaws’ as this is a general term for all saws used by hand (not machines), however, the term ‘handsaws’ can also refer to a specific saw which is described as a large panel saw. In this guide we will be…
6 Comments
Leave a Reply Cancel reply
You must be logged in to post a comment.
I am having a hard time finding Spear & Jackson saws in the US. The distributors I’ve contacted have a lot of Spear & Jackson garden supplies, but they don’t seem to carry the saws. Can you help?
Hi Mark,
Thanks for getting in touch.
We are looking to add tools available in the US in the future, however we want to order the tools ourselves to test out quality first.
This is something we are looking forward to adding to the site.
Thanks,
Izzy
Hi Mark,
maybe this is useful for you:
https://www.amazon.co.uk/Spear-Jackson-9550B-Brass-Tenon/dp/B0043YHJQ2/ref=pd_sbs_60_4?_encoding=UTF8&pd_rd_i=B0043YHJQ2&pd_rd_r=64fa98f8-94e0-11e8-9a6f-ad3730aad927&pd_rd_w=LbsFf&pd_rd_wg=iY4Rp&pf_rd_i=desktop-dp-sims&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_p=5179604776422437276&pf_rd_r=5TZV4SGSBRYEKVFDNDF8&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=5TZV4SGSBRYEKVFDNDF8
scroll down the page to the first review:
5.0 out of 5 starsExcellent value for one purchasing from the USA
25 February 2017
Verified Purchase
I am in the USA and purchased this saw from Amazon UK because the price was a fraction of what it would be in the USA. Shipping was inexpensive and prompt…
Hope this helps,
David
For cutting dovetails does Paul recommend a gents saw or a dovetail saw for a beginner?
Hi,
Thank you for your questions, I passed it on to Paul and his answer is below:
Personally, I reach for a gents saw for all my dovetailing because I feel it is the most efficient cut with the inline handle directly behind the spine.
Kind Regards,
Izzy
Good afternoon,
I was wondering what combination of saws Paul recommends for starting out. Was thinking a 2 panel saws(one for rip, one for crosscut), a carcass saw, a dove tail saw, and a gents saw. Is this a good combination?